Pictures of my Shack and other Hams working in Audio
Shack Photos
Photos of Other Hams
 
Transceiver Setup
Icom 
Kenwood
Yaesu

Setting up Audio Gear
DEQ 2496
Murf Box
Setup for HamAlyzer
Connecting it all together
EQ Behringer 1100/1124
Recording

SteppIR Info
Taking down old antennas
Tour of SteppIR factory
Building the antenna
Putting all up again
Adding the 30/40 upgrade

Where to get Audio Equipment
Commercial Links
Ham Links

Help with Audio Related Problems
Grounding and RFI
Questions answered #1
Questions answered #2
Questions answered #3  

How to fix DSP-100 problems (NEW) in Questions answered #3

Putting the SteppIR in the air

New Yaesu G-800DXA and 300 feet of cable

Taking the 2 meter beam up the tower

2 meter beam in place

Looking at rotor to put it in the tower

Putting the sling on the SteppIR

Starting to go up the tram. Note the sling and how the balance is done. Wrapping a tag line around one element is very helpful to guide it around guy cables.

A close up of how the tram is attached to the sling which is connected to the balance point on the boom of the SteppIR.  Note in this picture the PVC tube on the SteppIR that houses the control lines for the antenna is loose so the mast bolts can be accessed better. He realigned that tube once it was in the air.

Home                            Next page of putting it in the air